1. Base Oils (All Grades)
Overview:
Refined petroleum product forming the base for lubricants and greases. Available in Group I, II, III grades.
Applications:
* Automotive and industrial lubricants
* Grease and specialty oils
* Transformer oils
Technical Highlights:
| SR NO. | PARAMETER / CHARACTERISTICS | TEST METHOD | SPECIFICATION LIMIT & UNIT | TEST RESULTS |
| 1 | Specific Gravity @ 15°C | ASTM D1298 | 0.84 – 0.92 g/cc | 0.88 |
| 2 | Flash Point (°C) | ASTM D92 | Min 180 °C | 210 °C |
| 3 | Kinematic Viscosity @ 40°C | ASTM D445 | 30 – 500 cSt (depending on grade) | 150 cSt |
| 4 | Pour Point | ASTM D97 | Max -6 to -15 °C | -12 °C |
| 5 | Colour (ASTM) | ASTM D1500 | Max 2.5 | 1.5 |
| 6 | Sulphur Content | ASTM D4294 | Max 0.03 % wt | 0.02 % wt |
| 7 | Neutralization Number | ASTM D664 | Max 0.05 mg KOH/g | 0.03 |
| 8 | Water Content | ASTM D95 | Max 0.05 % wt | 0.02% |
| 9 | Calorific Value | ASTM D240 | ~10,200 kcal/kg | 10,150 kcal/kg |
Safety Information:
* Non-flammable but may cause skin dryness
* Avoid ingestion
2. Liquid Paraffin Oil
Overview:
Highly refined mineral oil suitable for pharmaceutical and cosmetic uses.
Applications:
* Cosmetics, lotions, creams
* Pharmaceuticals (laxatives, ointments)
* Food-grade lubricants
Technical Highlights:
| Liquid Paraffin Oil | ||||
| SR NO. | PARAMETER / CHARACTERISTICS | TEST METHOD | SPECIFICATION LIMIT & UNIT | TEST RESULTS |
| 1 | Appearance | Visual | Clear, Colourless, Odourless | Pass |
| 2 | Specific Gravity @ 20°C | ASTM D4052 | 0.82 – 0.89 g/cc | 0.84 |
| 3 | Viscosity @ 40°C | ASTM D445 | 11 – 70 cSt (depending on grade) | 35 cSt |
| 4 | Flash Point (°C) | ASTM D92 | Min 160 °C | 175 °C |
| 5 | Pour Point | ASTM D97 | Max -3 °C | -5 °C |
| 6 | Sulphur Content | ASTM D4294 | Nil / Trace | Nil |
| 7 | Neutralization Number | ASTM D664 | Max 0.01 mg KOH/g | 0.005 |
| 8 | Volatility (Loss @ 200°C/4hr) | ASTM D972 | Max 2 % | 1.20% |
| 9 | Colour (Saybolt) | ASTM D156 | +20 (Water White) | +20 |
Safety Information:
* Non-hazardous
* Avoid contamination with dust or chemicals
3. Recycle Base Oil
Overview:
Regenerated oil produced from used lubricants.
Applications:
* Industrial lubricants and greases
* Hydraulic and gear oils
* Eco-friendly blending material
Technical Highlights:
| SR NO. | PARAMETER / CHARACTERISTICS | TEST METHOD | SPECIFICATION LIMIT & UNIT | TEST RESULTS |
| 1 | Specific Gravity @ 15°C | ASTM D1298 | 0.85 – 0.92 g/cc | 0.89 |
| 2 | Flash Point (°C) | ASTM D92 | Min 160 °C | 170 °C |
| 3 | Kinematic Viscosity @ 40°C | ASTM D445 | 25 – 500 cSt | 120 cSt |
| 4 | Pour Point | ASTM D97 | Max -3 to -6 °C | -5 °C |
| 5 | Sulphur Content | ASTM D4294 | Max 0.1 % wt | 0.07 % wt |
| 6 | Ash Content | ASTM D482 | Max 0.02 % wt | 0.01 % wt |
| 7 | Water Content | ASTM D95 | Max 0.05 % vol | 0.02% |
| 8 | Neutralization Number | ASTM D664 | Max 0.05 mg KOH/g | 0.03 |
| 9 | Colour (ASTM) | ASTM D1500 | Max 3.0 | 2 |
Safety Information:
* Ensure proper filtration before use
* Avoid direct skin contact